Quick Reference Guide – Bosch 9000 Series Security

THIS QUICK REFERENCE GUIDE DOES NOT TAKE THE PLACE OF THE MANUFACTURES OWNER’S MANUAL. PLEASE REFER TO IT FOR FURTHER INSTRUCTION. QUICK REFERENCE GUIDE FOR YOUR SYSTEM:

The Bosch 9000 Security System must say “ready to arm” in order to arm the system, if not press the next key to see how many faults (open zones: Doors, Windows, Motions) there are, then press the next key again to read exactly which zones are faulted (open).

Arming The System
Your code followed by the enter button. Arms entire system with delay time to leave and enter the building.

Disarming The System
Your code followed by the enter button.

Silencing Alarms
Your code followed by the enter button will silence alarms, After silencing alarms, call us at 913.432.4545 with your name and password to stop any dispatches.

Removing Silenced Alarms
Your code followed by the escape key, or the silenced alarms display will be removed next time system is armed.

RESETTING THE SYSTEM
After a fire alarm press CMD 47 to reset fire devices. These devices must be reset after activating otherwise they will not work again until they are reset.

DOOR CHIME
Makes the keypad beep when door is opened. Press CMD 6 to turn the tone on, CMD 6 to turn tone off.

REFER TO THE OWNER’S MANUAL FOR ADDITIONAL INFORMATION AND OPERATING INSTRUCTIONS OR CONTACT ATRONIC ALARMS 24-HOURS A DAY AT 913-362-0000