Quick Reference Guide – Bosch 6412 Security

TO CANCEL FALSE ALARMS AND TESTING on your Bosch 6412 or 6000 Series Security and Fire SYSTEM, CALL OUR 24 HOUR CENTRAL STATION 913-432-4545 OR 816-245-2525

TO OBTAIN GENERAL INFORMATION OR REQUEST SERVICE, SALES, OR CENTRAL STATION CHANGES, CALL ATRONIC ALARMS INC. 913-362-0000.

ALL ON: Arms your entire alarm system perimeter and interior with entry and exit time.

PART ON: Arms perimeter of your alarm system without motion detectors with entry and exit time.

NO DELAY: Arms system with on entry or exit time on doors. Press the no delay button after choosing the correct arming function to arm with no delay time on doors.

BYPASS: Allows you to arm around points on your alarm system. Press the bypass button followed by the point number you wish to bypass followed by the * button. To unbypass a point repeat the process above for the desired points.

CHANGING CODES: Press the CMD 55, Enter the old code that you wish to change you will hear a beep then enter the new passcode then you will hear a second beep and now repeat the new code one more time.

RESETTING THE SYSTEM: after a fire alarm press CMD 47 to reset fire devices. These devices must be reset after activating otherwise they will not work again until they are reset.

DOOR CHIME: Makes the keypad beep when door is opened. Press CMD 61 to turn the tone on or off.

PANIC BUTTONS: Must be pressed twice and Central Station will dispatch immediately.

A. FIRE BUTTON: is a audible alarm
B. POLICE BUTTON: is a audible alarm
C. MEDICAL BUTTON: is not audible but beeps at the keypad

REFER TO THE OWNER’S MAUAL FOR ADDITIONAL INFORMATION AND OPERATING INSTRUCTIONS OR CONTACT ATRONIC ALARMS 24 HOURS A DAY AT 913-362-0000