Quick Reference Guide – Bosch 6112 Security

THIS QUICK REFERENCE GUIDE for the Bosch 6112 (6000 series) Security and FIre System DOES NOT TAKE THE PLACE OF THE MANUFACTURES OWNER’S MANUAL. PLEASE REFER TO IT FOR FURTHER INSTRUCTION. QUICK REFERENCE GUIDE FOR YOUR SYSTEM:

COMMAND 1: ARMS EVERYTHING, INCLUDING MOTION DETECTORS, DELAY TIME IN ENTRY/EXIT DOORS.

COMMAND 2: ARMS PERIMETER WITH NO DELAY TIME ON DOORS. NO MOTION DETECTORS

COMMAND 3: ARMS PERIMETER WITH DELAY TIME ON DOORS. WITH NO MOTION DETECTORS

COMMAND 4: RESETS FLASHING RED ZONE LIGHT AFTER ALARM HAS GONE OFF

COMMAND 5: CHANGE CODES – PRESS COM. 5, ENTER OLD CODE, ENTER NEW CODE, & ENTER NEW CODE AGAIN.

COMMAND 6: MAKES DOORS BEEP

COMMAND 7: FIRE ALERT

COMMAND 8: ARMS PERIMETER WITH DELAY TIME ON DOORS, NO MOTION DETECTORS, and AUTOMATICALLY BYPASSES OPEN ZONE

COMMAND 9: POLICE ALERT

IF ZONE IS OPEN: PUSH COMMAND 1, TONE WILL BE HEARD, PRESS COMMAND AND ENTER

A = LOCAL SYSTEM TEST-PRESS 22 TO SILENCE SIREN
B = COMMAND 6-WATCH-MAKES DOORS BEEP
C = RESET/CLEAR