Arming Your Bosch 2212 (2000 Series) Security and Fire System
Press 9 ONCE to arm entire system (with motion and delay)
Press 9 again to remove delay.
Press 0 ONCE to arm perimeter of system (No motion and with delay) Press 0 again to remove delay.
Note: You can disarm your system during the entry/exit delay by pressing clear.
Changing Your Code
Press 5 + Current Code + New Code + New Code Again
While the system is arming press *. The system will then scroll through your available zones. Enter the zone number you would like to bypass followed by *.
Press 7 +Your Code +(Options) 1= Off / 2= Short Beep / 3= Beep until key
pressed / 4= Beep until closed.
Press the Individual button TWICE to activate panics
(Note: Immediate Dispatch)
Press Fire Icon twice for FIRE
Press Medical Icon twice for MEDICAL
Press Police Icon twice for POLICE
Resetting System &. Clearing Troubles
Pressing the CLEAR key will clear troubles or to reset system press 3 +Your Code
To cancel false alarms or test your system call – (913) 432-4545
For sales or service for you Atronlc alarm call – (913) 362-0000
YOU MAY CALL EITHER OF THESE NUMBERS AFTER HOURS TO REACH OUR 24 hr EMERGENCY TECHNICAL SUPPORT TECHNICIAN