What Makes Up Your System.
Control Panel (System Controller)
The control panel is the “brains” of the security system. It receives transmissions from sensors and communicates data to the central monitoring station. The battery is located inside the control panel, which backs up the system if your power is shut down.
Keypads are units that can be installed throughout the building to provide easy-to-use access to your panel. By typing in your personal code and the correct buttons, you can arm and disarm your security system quickly.
Door and Window Contacts
Contacts are devices inserted into windows and doorways. When the door or window is open, the “contact” is broken and a signal will be sent to the panel and then onto the monitoring station.
Motion detectors are devices which trigger an alarm when something moves into its path. Passive infrared and microwave processing provide excellent catch performance with freedom from false alarms. There are also outside perimeter motion detectors that can be installed around the building.
Glass Break Detection
Also known as Audio Detectors, will be installed in rooms that have many fixed windows that can easily be accessed from the outside. If the window is broken, the shattering glass sound will set off the alarm.
The smoke detectors Atronic Alarms recommend tie into the security system and signal the Central Monitoring Station when tripped, who then dispatch the fire department to your building. Atronic Alarms offers a fire only program to those who are interested in protecting their property from fire in a cost effecient way.
Fires typically cause a rapid rise in temperature in the surrounding area. Heat detectors sense the rise in temperature and signal an alarm if the increase is 15 degrees or more per minute or if the environmental temperature rises above 135 degrees. Best locations for heat sensors are areas such as attics and garages.
Carbon Monoxide Detectors
With a CO alarm that is part of your security system, your safety is monitored day and night. Your monitoring station can automatically send emergency help in the event of an unsafe condition in your building, giving your occupants added peace of mind. Water Detectors (or Water Bug) The water detector is a device that is connected to the alarm panel and is placed in areas that are prone to water problems. It will trigger an alarm when a film of water forms a bridge between the two contacts on the device and then you will be contacted.
There are many different temperature sensors that can be set to detect when temperatures reach a particular point. These sensors are good in computer IT rooms, wine cellars in restaurants, freezers and other areas you might need regulated.