ATRONIC ALARMS QUICK REFERENCE ON A BOSCH RADIONICS 6412 PANEL
Print This Page | Back to Quick Reference Page
TO CANCEL FALSE ALARMS AND TESTING SYSTEM CALL OUR 24 HOUR CENTRAL STATION 913-432-4545 OR 816-245-2525
TO OBTAIN GENERAL INFORMATION OR REQUEST SERVICE, SALES, OR CENTRAL STATION CHANGES CALL ATRONIC ALARMS INC. 913-362-0000.
ALL ON: Arms your entire alarm system perimeter and interior with entry and exit time.
PART ON: Arms perimeter of your alarm system without motion detectors with entry and exit time.
NO DELAY: Arms system with on entry or exit time on doors. Press the no delay button after choosing the correct arming function to arm with no delay time on doors.
BYPASS: Allows you to arm around points on your alarm system. Press the bypass button followed by the point number you wish to bypass followed by the * button. To unbypass a point repeat the process above for the desired points.
CHANGING CODES: Press the CMD 55, Enter the old code that you wish to change you will hear a beep then enter the new passcode then you will hear a second beep and now repeat the new code one more time.
RESETTING THE SYSTEM: after a fire alarm press CMD 47 to reset fire devices. These devices must be reset after activating otherwise they will not work again until they are reset.
DOOR CHIME: Makes the keypad beep when door is opened. Press CMD 61 to turn the tone on or off.
PANIC BUTTONS: Must be pressed twice and Central Station will dispatch immediately.
A. FIRE BUTTON: is a audible alarm
B. POLICE BUTTON: is a audible alarm
C. MEDICAL BUTTON: is not audible but beeps at the keypad
REFER TO THE OWNER’S MAUAL FOR ADDITIONAL INFORMATION AND OPERATING INSTRUCTIONS OR CONTACT ATRONIC ALARMS 24 HOURS A DAY AT 913-362-0000
