Online Services
Home Automation Control: Thermostats, Lights, Garage Doors
Automate Your Thermostats [View Pdf of Specs]
Omnistat thermostats feature a sleek, modern case design that blends in with any décor. The large LCD display with "cool blue" LCD backlight shows time, temperature and operational mode.
The controls are easy to use, with simple raise and lower temperature keys, mode (off, heat, cool, auto) and fan keys (on, auto). The Prog key is used for programming when the thermostat's internal scheduling features are used. The Hold key maintains the current settings as long as the hold indicator is on. A "remote" indicator shows when the thermostat has been set by remote control.
Omnistat thermostats feature a multi-mode communications interface for connection to many types of home and building automation systems. This interface allows more comprehensive energy and comfort management by setting the thermostats based on occupancy and home or building modes along with traditional scheduling. Two full communications modes are available for connection to automation systems and personal computers. Two additional modes are available for simplified connection to most access control, security and time clock systems.
Automate Your Lights
Most HLC switches are available in White (WH), Ivory (IV), Almond (AL), Light Almond (LTA), Brown (BR), Grey (GR), and Black (BL) colors. LED indicator lights can be programmed to glow Blue, Red, Magenta, or turned off entirely. Custom laser engraved buttons are available for both the Scene and House Status Switch.
Most HLC switches and dimmers accommondate standard Decora-style Wallplates.
Dimmers and Switches: Replace traditional light switches with ones that have attractive, back-lit buttons putting lighting control at your finger tips. These switches work over existing house wiring for easy installation in renovations, retrofits, and upgrades.
Lamp Module: Control any lamp up to 300 watts, including setting scenes with it. Just plug a lamp into the lamp module and the lamp module into an electrical outlet.
Appliance Module: Control loads up to 15 Amps, general purpose, 1/2 horsepower, including setting scenes with it. Just plug an appliance into the appliance module and the appliance module into an electrical outlet.
Scene Switch: Set a lighting scene with the push of one button! Control all lights in a room or area. Lights may be turned on, off, dimmed, brightened, and set to four different scenes to provide limitless options for both security and aesthetic lighting in your home. The buttons on this switch may be custom engraved so that you may "name" the scene that each button controls. Scene Switches have an integrated infrared sensor and its buttons may be activated by a remote control. Scene Switches can be placed into a table top cradle that plugs directly into any electrical outlet. This table top cradle allows for convenient control of your scenes from a bedside nightstand, on desk in a home office, or next to your favorite chair. There is a remote control available to activate scenes through the infrared receiver built into Scene Switches.
House Status Switch: When used with an HAI Home Control System this master lighting control shows the status for up to eight rooms. If any light is on in a room, that button is illuminated. Pressing a button on the House Status Switch will turn all of the lights in that room on or off. The buttons on this switch may be custom engraved so that you may "name" the room that each button controls.
Load Control Module: The HLC Load Control Module controls the power consumption of high wattage loads such as pool pumps and hot water heater using UPB™.
Automate Your Garage Doors
You'll never have to worry again whether or not you remembered to close the garage door. With the Automate Garage Door module on the Omni system, you can program your door to automatically close and/or open anytime you want.
